tsgconfig - Interactive utility to edit link configuration files
tsgconfig [-h] [-m] [-n [netID | netname]]
The following table describes the command line options.
|
Option |
Description |
|
-m |
Run in monochrome mode. |
|
-n |
Allows specification of the network Name or ID to trace. Network names and IDs are given in the file /etc/packetnets. |
|
-h |
provides help on available command line arguments. |
tsgconfig edits the link configuration files in /usr/lib/frel/config (frame relay), usr/lib/x25/config (X.25 and LAPB) or usr/lib/tsg/config (raw synchronous) based on the configuration files specified in /etc/packetnets. It does not actually reconfigure the link. You must run fconfig (frame relay), x25config (X.25 and LAPB) or wanware stop; wanware start to have the new configuration take effect.
Note: Not all options are configurable in tsgconfig. To change other options, you will need to manually edit the link configuration file.
Frame Relay Troubleshooting, X.25 Troubleshooting, LAPB Troubleshooting and Raw Synchronous Troubleshooting in the Administrator's Guide
Copyright © 1997-2004 The Software Group
Limited. All Rights Reserved.
® Netcom is a registered trademark of The Software
Group Limited.