stest(1)

Name

stest - raw synchronous test application

stest [-f frames] [-b bytes_per_frame] [-S seconds] [-RcrsFh] [-n networkID]

stest may be used to send a pattern and/or receive data on a raw synchronous link.

These command line options are recognized:

Option	Description
`-f`	The number of frames to send before exitting. Default is 0, meaning an infinite number.
`-b`	The number of bytes which should be put in transmitted frames or expected in receive frames. Default is 1500.
`-S`	The number of milliseconds that the program should wait between successive transmitted frames. Default is 0.
`-R`	enable fast refresh (after every frame) of the statistics display
`-c`	disable checking of received data for the expected pattern
`-r`	operate in receive mode and sent no data. This is the default.
`-s`	operate in send mode and receive no data.
`-F`	operate in full duplex, both sending and receiving the test pattern.
`-n`	picks the network ID (from /etc/packetnets). The default is 0.