| Index |
Forward to Installation
|
This guide outlines the installation of Wanware. There will be a brief description of configuration, specifically how the adapter communicates with the network. This is described in more detail in the Administrator's Guide.
We recommend that you take a few minutes to read through the installation steps once before beginning the installation.
The installation script does not install any default protocol parameters for Wanware operation. All parameters must be configured using the wwconfig utility after the installation is complete.
The Wanware installation scripts are designed to upgrade an existing Wanware installation or perform a new one. If you're upgrading your software or adding hardware, you don't have to remove, then reinstall the product. Simply follow the normal installation steps outlined in the next section.
The reinstall will not overwrite your protocol or parameter configuration, but it is still recommended that you save your configurations before starting.
When the installation is complete you will be required to reboot.
If the adapter has not yet been installed, install it now.
See Link Configuration for the location of the configuration files.