ssink(1)

Name

ssink - data sink for gentalk (for Linux clients only)

Syntax

ssink [-n netid] [-u protocolID] [-cTth]

Description

ssink may be used opposite gentalk. ssink waits for an incoming call with protocol ID 1 and attempts to match packets with the remote gentalk.

These command line options are recognized:

Option Description

-n The network ID. Default is 0.

-u The protocol ID to listen for. Default is 1.

-c Check packets for consistency. Default is off.

-t enable debugging output to stdout. Default is off.

-T Use TCP Synchronous mode. Default is asynchronous mode.

-h Show help for this command.

Option	Description
`-n`	The network ID. Default is 0.
`-u`	The protocol ID to listen for. Default is 1.
`-c`	Check packets for consistency. Default is off.
`-t`	enable debugging output to stdout. Default is off.
`-T`	Use TCP Synchronous mode. Default is asynchronous mode.
`-h`	Show help for this command.

ssink(1)

Name

Syntax

Description

See Also